MG-Wave LED lighting provides longer stable images than other form of lighting, with no deterioration caused by repeatedly switching the light on and off. The Moritex MLNL series of LED line illuminators have been designed for high-performance linear lighting and single-dimensional linear CCD camera lighting. Based upon Moritex’ MG-Wave constant current technology, the MLNL series of LEDs provides even illumination, easing the inspection of glass substrates for scratches and other imperfections, as well as the inspection of boards and connector pins and lighting for single-dimensional linear CCD cameras.

MG-Wave LED lighting provides longer stable images than other form of lighting. Unlike other forms of lighting there is no deterioration caused by repeatedly switching the light on and off. Operating across a narrow-bandwidth MG-Wave makes it easy to acquire the contrast critical for image processing. Incorporating small light source elements enables MG-Wave to deliver lighting dimensions optimised to a given application. The MG-Wave constant current detection system reads the signal to control the rated current, which is adjusted to the number of LEDs in every lighting module.

The MG-Wave range also includes high powered spot, direct ring, low angle ring, shadowless, edge backlit, array backlit, coaxial, bar, linear, oblique and parallel lighting LED’s as well as power sources and a wide variety of LED lighting accessories.

Moritex LEDs are available in six colours and grouped into over 100 luminance levels. The LEDs that go into Moritex units are always from the same group, ensuring even light output even in larger units. Before leaving the factory all MG Wave LED units are tuned to the same standard performance, ensuring consistency between units.